My workbench has seen heavy use with lots of projects coming and going. I wouldn’t change a thing about it. My one complaint is that the bench grinder gets used so much it is always attached. Bench space is consumed, grinding grit and junk is often covering the work surface and vibrations tend to shake things off the table. Time for a dedicated stand. I had a pretty good idea of what to build in my head, but took this as an opportunity to practice drawing. I drew a few versions, a full assembly process (I found a better and worse order of operations when doing that), and finally tried to do a few perspective drawings. My ability isn’t great, but practice makes perfect and the process highlighted some minor issues with my original idea.
I picked up an 8 foot 2×8 and started cutting out a basic stand. The very bottom is a 2×12 bit of scrap I had that was about the right size. I screwed it all together and placed a long section of 2×8 on top to hold the grinder and an adjustable tool rest. I found some rubber pads to put on the bottom to keep the stand from walking around and cut down on vibrations.
To keep this thing in place I wanted to add a lot of weight. Sand is about the best thing I can think of that is dense, cheap, obtainable, and easy to store. It is about 100lb per cubic foot in density, and costs <$5 for a 50lb bag. Screws and silicone calking hold plywood to the uprights, making an open topped box shape. The space accepted a full bag of sand. A piece of 2×8 and just sits on top of the sand in case I want to empty it out at a later date.
I bolted down the grinder and attached a veritas tool rest that was previously on a small hand operated grinder. I think it will serve me better here on this highly used tool. The stand is a good height, access is easy, and the weight keeps the vibrations down.